panomano's forum messages

back to panomano's profile

Search the forums:
Forum/thread  Message 
Forum:
Tips & Tricks
Thread:
Autodesk Stitcher issue
Autodesk Stitcher issue
Posted: 31 Jul 2010 at 21:26 GMT 		go to thread
I have been using autodesk stitcher and with my rokinon 8 mm lens. When I take 6 around + zenith and nadir I run into real issues getting either the top or bottom to stitch in correctly.

I don't need so much image to fill in the z and n holes. The z and n images tend to screw things up on an otherwise beautiful stitch. Ideas or insight?
alert moderator
Forum:
Tips & Tricks
Thread:
Pano images and lens - Help!
Re: Pano images and lens - Help!
Posted: 31 Jul 2010 at 21:20 GMT 		go to thread
Great advise and insight thank you all.
alert moderator
Forum:
Tips & Tricks
Thread:
Pano images and lens - Help!
Re: Pano images and lens - Help!
Posted: 31 Jul 2010 at 4:58 GMT 		go to thread
What would be the right lens for this camera? What does "right lens, shaved" mean?
alert moderator
Forum:
Tips & Tricks
Thread:
Pano images and lens - Help!
Pano images and lens - Help!
Posted: 31 Jul 2010 at 3:22 GMT 		go to thread
I have a Canon eos rebel xt (8 mp). I have a rokinon 8mm fish eye lens (asperical - full frame). The lens specs says 180 degress diagonal. I use autodesk stitcher. Shooting in a vertical/portrait position it appears I am only getting about 150 degress.

Do I have the wrong lens to capture 180 degrees? Very frustrated. help please.
alert moderator
Forum:
Personal Classifieds
Thread:
360Precision Atome for Sigma 8 f3.5 Canon &Nikon rings
Re: 360Precision Atome for Sigma 8 f3.5 Canon &Nikon rings
Posted: 31 Jul 2010 at 3:06 GMT 		go to thread
If you still have it will you take $150

Lance
alert moderator